How to make jigsaw puzzle

with rolling jigsaw puzzle machine

Operation:
1. Print the picture you want to print, the paper can be high-quality photo paper or photo paper or adhesive paper. Then put the picture adhibited to the 500-1200g cardboard.
2. Put the file up side down to the mould, side to side with the picture facing to the knife.
3. Put the protecting board over the cardboard with picture, the protecting mould is to protecting the mould from the axis. If the whole file’s thickness is not enough to process cutting, please add some paper board or please tighten the distance until it is enough.
4. Put the front of the files near the axis, and push forward gently, and power on the switch.
5. When the mould comes into the axis, put away your hand, then machine will pushing forward the mould automatically.
6. Please keep watching the processing in case the cardboard losing position.
7. Please take care while holding the moulds,, please don’t touch the mould for it may injure you hand.
8. The photo jigsaw puzzle is finished after the mould coming out from the other side.